Axiohm Astrium Specifications download pdf (Page 11)

ASTRIUM Set-Up Guide 11/14 Reference :3108332 - Issue Z

SELF TEST TICKET DESCRIPTION

To print the Self-Test follow one of the two procedures indicated below:

Procedure 1: Switch the printer to the Printer Configuration Menu by following the instructions provided

in section 4.1.2 in the user manual; pressing the [FEED] button switches the printer to the

Self-test mode and then to the online mode.

Procedure 2: With the printer powered off and unplugged from the electrical outlet, plug the

printer’s power cord back into the electrical outlet while holding down the [ON/OFF] button.

To perform Self-Test again, start the procedure from the beginning.

In the Self Test mode the following information is printed: the firmware release, the Setup parameters (with

the type of interface board installed) and the selected code page. Provided below is a Self-test printout

example.

Setup parameters and related

values

Code page

Firmware release

PDF created with pdfFactory trial version www.pdffactory.com

1 2 ... 6 7 8 9 10 11 12 13 14

No comments

Axiohm Astrium Specifications Page 11